How do I check my REP Band's battery level - Noise REP Band
"• There are three ways to check your battery level:
1. Double-tap the band; the LED will illuminate for three seconds, showing solid green for 50–100%, solid yellow for 20–49%, solid red below 20%, and flashing red below 5%.
2. The device card within the NoiseFit app displays the live battery percentage.
3. While charging, the LED breathes red, yellow, and green as the charge increases, turning solid green once fully charged.
How long does the REP Band take to charge - Noise REP Band
"• Charging from empty to 100% takes approximately 60–90 minutes.
• To view live progress and the estimated time remaining: connect the charger, open NoiseFit, and tap the Device icon at the top right of the home screen.
• The device page will display the current battery percentage and the time remaining to a full charge.
No charging LED when placed on the charger - Noise REP Band
• The LED remains lit throughout charging, so no light usually means there is no contact or no power reaching the band.
1. Clean the charging contacts on both the band and the charger with a dry, lint-free cloth.
2. Check the cable for any signs of damage and try a different power source; a standard 5V adapter or USB port is recommended, and fast chargers should be avoided.
3. Re-seat the magnetic cradle so that it snaps fully into place.
4. If no LED appears at all after 30 minutes on charge, the charger itself may need replacing; please contact support.
Why did my REP Band turn off on its own - Noise REP Band
"• This is the band's built-in Low Power Shutdown, which protects the battery from over-discharging.
• At exactly 3% charge, the band saves any current workout data, safely closes its Bluetooth connection, and powers down completely; nothing is lost.
• Connect the charger to power it back on, and it will reconnect to the app automatically."
Battery draining fast - Noise REP Band
• The band is designed to monitor you continuously, so you should expect battery life measured in days rather than weeks.
• If it is draining unusually quickly, try the following:
1. Update the firmware from the app's device page, as battery-efficiency improvements are released regularly.
2. Keep your phone's Bluetooth switched on, as a band repeatedly searching for its phone will drain its battery faster.
3. Complete one full drain-and-recharge cycle to recalibrate the battery meter.
4. If the drain persists after updating the firmware, please contact support so that we can check the battery's health.
