How should I wear the REP Band for accurate tracking - Noise REP Band
1. Position the band approximately 1 cm (0.4 in) above your wrist bone.
2. Ensure the sensor sits flat against your skin.
3. Wear it snug but not tight: it should not slide when you shake your wrist, and should not leave a deep mark when removed.
• For more accurate readings, tighten the strap by one notch during workouts, and loosen it slightly for comfort during sleep.
How do I adjust the strap - Noise REP Band
• Pull the excess strap through the bar at the end of the housing to tighten or loosen the fit.
• Aim for a snug, not tight, fit (see 'How should I wear the REP Band for accurate tracking?').
Cleaning the band and sensor - Noise REP Band
Cleaning Instructions
1.Clean the band strap weekly using mild soap and water.
2.Wipe the optical sensor and charging contacts with a soft, dry, lint-free cloth.
3.Ensure the REP Band is completely dry before wearing it again or placing it on the charging dock.
Notes
Do not use hot water to clean the REP Band.
Do not use harsh chemicals, solvents, or abrasive cleaning agents on the optical sensor or the band.
Regular cleaning helps maintain accurate sensor performance and reliable charging.
